• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9

Sectyme Wireless Waterproof Bike Vibration Alarm USB Charging Remote Control Motorcycle Electric Bicycle Security Burglar Alarm

From £21.20
  • Ships From:

  • Color:

in stock

Categories:

Buy With Confidence

100% Safe Payment

;

  • Description

    Sectyme Wireless Waterproof Bike Vibration Alarm USB Charging Remote Control Motorcycle Electric Bicycle Security Burglar Alarm

    Reminder:

    1.If you are worried about not knowing how to use the product, you can contact us and we will send you the document of the product manual by email. You can copy the text and translate it into the language you want.

    2. Before the first use, please charge it first, and then it can be used normally after activation. It is recommended to use it again after it is fully charged

    3. One alarm host can be paired with three remote controls

    4.We have plenty of stock,wholesalers can rest assured that orders

    Product information:

    Remote control battery:12V/27A Alkaline battery

    Alarm Battery Capacity:400mAh(3.7V)lithium battery

    Remote control distance: 0-80M

    Remote control size: 58x35x15 MM

    Sound decibel: 115 dB

    Applicable models: Applicable to bicycles, electric bicycles, electric vehicles, motorcycles,

    outdoor camping equipment and personal safety protection.
    Product introduction:
    Arming & Disarming:
    Arming: Short press the remote control [Arming ] lock button will sound “Do-Re-Mi”, at this time the main unit has entered the arming state. 3 seconds later to hear “DI”, during this period touch the main unit will issue a “di-di “. If you continue to touch the mainframe again, the alarm will be “biu-biu-biu” for 30 seconds. 30 seconds after touching it again, the alarm will continue.Disarming: In the arming state, short press the remote control[Disarming ] unlock button, the main unit will sound “mi-re-do”, at this time, the main unit has been disarmed.
    Alarm:
    In disarming mode, short press [ Alarming ]lightning button, the main unit will keep alarming “
    biu-biu-biu”. You can short press [ Disarming ] unlock button to exit.
    Please use our included 2A USB charge cable, you can connect to your PC USB port, or by your smart phone 5V/ 2A adaptor, or power banks.(1)Hours fully charged. (2)When charging, the power indicator 1, 2, 3 in turn gradually increase until 3 bars are always on for a full charge. (
    3) When the power is low, the power indicator 3, 2, 1 in order to reduce to 1 bar of power, please charge. (4) When charging, it is recommended to use the power bank to charge directly or the main unit screw loosened and removed before charging.
    PC + ABS pure copper material material, IPX5 waterproof and dustproof, high and low temperature resistance, not afraid of wind and rain, cold and heat.
     The remote controller can remotely control the alarm, and the remote controller can control the alarm within 0-80m of the open distance, which can help you find your items  The maximum volume can reach 115dB, and the volume can be adjusted. The car level volume can effectively deter thieves
     Alarm vibration sensitivity setting: Press and hold the remote control [ Disarming ] button until the remote control LED lights up again, and the alarm will have a “Bi” sound. At this time and then press the remote control [ Arming ] button, each time you press, the vibration sensitivity switch level. Sensitivity has 3 levels adjustable: high – medium – low. The corresponding sound is “BiBiBi (high)”, “BiBi (medium)” “Bi (low)”, after setting, press the remote control [ Disarming ] button to exit the sett
    levels of volume can be set: high – medium – low. Press and hold the remote control [ Disarming ] button and do not release your hand until the remote control LED lights up again, while the alarm will have a “Bi” prompt, at this time in the remote control [ Alarming ] button, each press, switch the volume once, each switch to play the corresponding volume of “Bi” sound. When the setting is finished, press the remote control [Disarming ] button to exit the setting.  Ringtone Setting: When it is not in the armed state, you can set 5 kinds of ringtones. Press and hold the remote control [ Disarming ] button until the remote control LED lights up again, while the alarm will have a “Bi” sound. At this time in the remote control [ Ringtone ] button, each time you press, the bell switch once, and play the corresponding ringtone. When the setting is complete,press the remote control [ Disarming ] button to exit the setting. The five ringtones are “horn sound 1″,”horn sound 2”, “horn sound 3”, “bird sound” and “di-di sound”.  Applicable to bicycles, electric bicycles, electric vehicles, motorcycles, outdoor camping equipment and personal safety protection 

    Installation of Remote Control: (1) The remote’ bracket is fixed with a tie in a position that is easy to touch with the left and right thumbs. (2) Place the remote. (3) Press and hold the bottom snap position of the bracket to remove the remote. Installation of Bracket:(1) Choose any position on the bike where it can be fixed. (2)Secure and tie down the main unit and cut off the excess tie. (3) Insert the main unit into the fixing bracket and tighten thescrew. (4) The main unit can be removed by loosening the screw in an anti-clockwise direction.

Follow us on:

Subscribe to our Newsletter
Please wait...